Over the past few days, we have been in the Green Screen Room as much as we can. We have been setting up, and all the lights have been hung up. However, during calibration, we realized that our sensors could not touch anything that was conductive, or had electricity running through it. We had to re-wire everything in order to have proper calibration. Even though we straightened everything out, we realized the electrostatic field in the Green Screen room fluxuates a lot. Any change in the environment would require us to re-calibrate the lights.
In order to see the shimmering effect on the floor, we had to purchase a white cloth to put on the floor. However, we could not find a big enough one, so we tiled 2 cloths.
If we had more time, we would switch to motion tracking sensors and lower decibel servo motors.
No comments:
Post a Comment