Today, we finally had access to the Green Screen Room. We tested out our lights, but there are lots more to be done. We were able to silence our servo motor, but we have encountered more problems. The AC in the Green Screen Room is not clean. As a result, we have had dirty feedback, not allowing our lights to sense the way we want them to. We will have to further test our lights and calibrate them.
We were able to bring in four 2' x 4' plywood into the Green Screen Room and we hung them up on the ceiling, which were supported by the bars. The plywood is used for support for our Shimmering Lights. We did a trial run and it looks good, however, we still need to calibrate our sensors.
No comments:
Post a Comment